Well I thought about this post for a few days before I decided that it was best you all had this information, than worry about the few of you who may abuse this. It was in the wild already anyway. I think the Second Amendment is fundamental in protecting our ever eroding freedoms. The links contain the down-loadable files needed to pint or mill these parts. This is all highly experimental, use at your own risk. I have not printed one myself, yet, ( I already own a Bushmaster) but even if you dont have a printer, the files would be good to save and store or host. If I error, let it be on the side of liberty and freedom.
http://hackaday.com/2012/07/26/3d-printed-ar-15-lower-works/
http://www.ar15.com/forums/t_3_118/579913_3D_printed_lower___yes__it_works_.html
http://www.thingiverse.com/thing:11770
http://www.cncguns.com/downloads.html
All ages because the Minutemen, were often boys....while many men were happy slaves to the crown.
By: monkey fcker
In: Weapons
Tags: AR-15, Second Amendment, freedom, 3d printing, right to bear arms,
Location: Texas, United States (load item map)
Marked as: approved
Views: 6291 | Comments: 61 | Votes: 5 | Favorites: 8 | Shared: 268 | Updates: 0 | Times used in channels: 2
Advertisement below
|
|
| Liveleak on Facebook | |
|
LIKE Liveleak.com |
-
Cop violates right to bear arms
-
D.C. Woman Who Lost Children to Gun Violence Demands right to Bear Arms
-
Czar sunstein opines on hunting, right to bear arms and animals need human rights.
-
6 Facts About the Second Amendment Every American Should Know. Part 1/3
-
Your Say, I say Guns, rights and the human right not to be killed
-
Charlton Heston - Right to Bear Arms
-
Sunstein Attacks (Gun Rights) Second Amendment (Slowly all our rights are being eradicated, while the sheeple watch American Idol)
-
The right to bear arms.....
-
Sotomayor's confirmation will likely shrink property rights and Second Amendment rights
-
New groups mobilize as Indians embrace the right to bear arms
-
US right to bear arms under fire
-
UN Targets Americans Right to Bear Arms
guns are illegal over here,so are knives...do you have any programs for spoons!! if i am being picky a large soup spoon would be awsome...thanks
Posted Jul-29-2012 ByBONGOS (101.50) 
BONGOS View Channel Send Message
(6)
@BONGOS
what about sporks? bet you the nanny staters havn't thought about that one
Posted Jul-29-2012 Bygolem (1762.22) golem View Channel Send Message
(1)
we thought about them and we do have them, but they are behind quite a high chain link fence, a bit like your mexicans
Posted Jul-29-2012 ByBONGOS (101.50) 
BONGOS View Channel Send Message
(0)
@BONGOS
oh dear, guns are not illegal in the uk,they simply require a licence. i have plenty.
Posted Jul-29-2012 Bymrlentil (102.00) 
mrlentil View Channel Send Message
(1)
It will make gun control sillier than it is. Being able to make your own favorite gun when you want and how many you want.
So if they try to ban guns there will ALWAYS be a way.
I just love it!
Posted Jul-29-2012 Bytomsack (107.20) 
tomsack View Channel Send Message
(4)
3d printing is dope
Posted Jul-29-2012 ByAllah Crusher (217.30) 
Allah Crusher View Channel Send Message
(1)
@Allah Crusher
now that you mentioned it :D
They work already on a 3D printer that puts atoms together to build drugs.
Posted Jul-29-2012 Byfusselkater (417.68) 
fusselkater View Channel Send Message
(1)
@fusselkater
nice. do you happen to know what they've made?
Posted Jul-30-2012 ByAllah Crusher (217.30) 
Allah Crusher View Channel Send Message
(0)
@Allah Crusher
just read some news articles recently that they are developing it.
http://www.google.com/search?hl=en&q=3d+printer+drugs
Posted Jul-30-2012 Byfusselkater (417.68) 
fusselkater View Channel Send Message
(1)
@fusselkater
thanks for the link!
Posted Jul-30-2012 ByAllah Crusher (217.30) 
Allah Crusher View Channel Send Message
(0)
I want a full size 3D of Jessica Alba please....must be moisture proof though....
Posted Jul-29-2012 Bygizmo8 (412.76) 
gizmo8 View Channel Send Message
(1)
Hmm, manufacture your own gun and go to jail or buy one at the local shop legally, tough decision.
Posted Jul-29-2012 ByBilln911 (94.50) 
Billn911 View Channel Send Message
(1)
@Billn911 its not illegal to make your own gun, by federal law.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(0)
@pootin well it was up for a lot of debate on all forums, this is an area most people, even gun owners are not familiar with. i knew the anti-gun people would freak. this is where we are headed, and i want you all to get the files before they disappear....
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(0)
@pootin
I would have agreed with Billn911, i would have thought it was illegal to make your own, but I would if been wrong to.:
With certain exceptions a firearm may be made by a non-licensee provided it is not for sale and the maker is not prohibited from possessing firearms. However, a person is prohibited from assembling a non-sporting semi-automatic rifle or non-sporting shotgun from imported parts. In addition, the making of an NFA firearm requires a tax payment and approval by ATF. An a More..
Posted Jul-29-2012 Bylostlad (138.68) lostlad View Channel Send Message
(2)
Brilliant, absolutely brilliant!
Posted Jul-29-2012 Byfasterthansnail (156.80) 
fasterthansnail View Channel Send Message
(1)
@stinkbuttdog yes it is.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(-1)
@monkey fcker
no it's not, it's simply for the lower stock, the rest you have to purchase
Posted Jul-29-2012 Bygolem (1762.22) golem View Channel Send Message
(1)
@stinkbuttdog
no it's not. it's just a lower. the rest of the gun is unaltered.
it is impossible to 3d print a functioning barrel, bolt and trigger assembly out of abs or pla plastic.
Posted Jul-29-2012 ByKasmackba (368.38) Kasmackba View Channel Send Message
(1)
@golem yes, thats true, but the lower is the only part that ATF tracks, where the numbers are located, that is what counts as "the gun." the rest you buy in a free state like any other part.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(1)
@monkey fcker
i'll take your word for it
Posted Jul-29-2012 Bygolem (1762.22) golem View Channel Send Message
(0)
oo0oh, cool nerf gun ..... thanks !
Posted Jul-29-2012 ByAussie (9194.80) 
Aussie View Channel Send Message
(0)
My Epson stylus color 880 isn't doing a very good job of this.
Posted Jul-29-2012 Byfr33thinker (900.70) fr33thinker View Channel Send Message
(0)
the parts must be machined after printing. Direct laser sintered metal is not smooth enough.
Posted Jul-29-2012 ByStormRising (401.26) StormRising View Channel Send Message
(0)
@StormRising
Yes, but it is still only a baby.
Posted Jul-29-2012 Bytomsack (107.20) 
tomsack View Channel Send Message
(0)
@tomsack A none firing baby. Metal pipe, nail, spring works. This won't straight out of the machine for another few years.
Posted Aug-1-2012 ByStormRising (401.26) StormRising View Channel Send Message
(0)
Does this open with autodesk CAD?
Posted Jul-29-2012 Byorangepeel (114.20) 
orangepeel View Channel Send Message
(0)
Very cool!
Posted Jul-29-2012 ByZota (212.64) Zota View Channel Send Message
(0)
Imagine if 3D printers could print out hookers... hmmmmmm i'd be swimming in bitches all day :)
Posted Jul-29-2012 ByIlluminat3d (265.00) 
Illuminat3d View Channel Send Message
(0)
Isn't this already possible if you own / have access to a 5 or 6 axis CNC?
Posted Jul-30-2012 ByJohnnyTekno (16.24) JohnnyTekno View Channel Send Message
(0)
@JohnnyTekno
Good point...
Posted Mar-1-2013 ByJustice Dealer (98.94) Justice Dealer View Channel Send Message
(0)
I can't imagine a 3d printer could create something strong and precise enough to serve as a useful gun. At least not something that could withstand more than a couple shots without blowing up in the shooter's face.
Posted Jul-29-2012 BySaros (793.20) 
Saros View Channel Send Message
(0)
@Saros the lower portion of the ar-15 does not take a lot of pressure.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(0)
@Saros
the technology is rapidly advancing and the machines are getting smaller and cheaper, once you are able to use multi material stock then the sky is the limit, anything could be built then, this is the biggest technology game changer of the century in my opinion, many people don't realize it, imagine taking this machine to space and using martian soil to build habitats or spare parts etc..
Posted Jul-29-2012 Bygolem (1762.22) golem View Channel Send Message
(3)
@golem high end machines can print in silver, stainless steel, ceramics, its really taking off.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(0)
@monkey fcker
well yes, they've been able to do that for a while, in manufacturing plants this has been common, but a smallish cheap printer say the size of a mini fridge that can create a object with different feedstocks at the same time,
Posted Jul-29-2012 Bygolem (1762.22) golem View Channel Send Message
(1)
@golem now you can get one for the house for less than a grand, an abs machine.
Posted Jul-29-2012 Bymonkey fcker (267.38) monkey fcker View Channel Send Message
(0)